Table of Contents

Index to Financial Statements

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2003

or

For the transition period from              to             

Commission File Number 0-22303

GULF ISLAND FABRICATION, INC.

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(g) of the Act: common stock, no par value per share.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Act). Yes  x    No  ¨

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant at June 30, 2003 was approximately $139,523,656.

The number of shares of the registrant’s common stock, no par value per share, outstanding at February 9, 2004 was 11,817,092.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive Proxy Statement prepared for use in connection with the registrant’s 2004 Annual Meeting of Shareholders to be held April 28, 2004 have been incorporated by reference into Part III of this Form 10-K.

Table of Contents

Index to Financial Statements

GULF ISLAND FABRICATION, INC.

ANNUAL REPORT ON FORM 10-K FOR

THE FISCAL YEAR ENDED DECEMBER 31, 2003

TABLE OF CONTENTS

i

Table of Contents

Index to Financial Statements

PART I

Items 1 and 2. Business and Properties

Certain technical terms are defined in the “Glossary of Certain Technical Terms” beginning on page G-1.

General

Gulf Island Fabrication, Inc. (the “Company”), together with its subsidiaries, is a leading fabricator of offshore drilling and production platforms and other specialized structures used in the development and production of offshore oil and gas reserves. Structures and equipment fabricated by the Company include jackets and deck sections of fixed production platforms; hull and/or deck sections of floating production platforms (such as tension leg platforms (“TLPs”)), “SPARs and FPSOs”; piles, wellhead protectors, subsea templates and various production, compressor and utility modules; and offshore living quarters. Services provided by the Company include offshore interconnect pipe hook-up; inshore marine construction; manufacture and repair of pressure vessels; and steel warehousing and sales.

The Company was founded in 1985 by a group of investors, including Alden J. “Doc” Laborde and Huey J. Wilson, and began operations at its fabrication yard on the Houma Navigation Canal in southern Louisiana, approximately 30 miles from the Gulf of Mexico. The Company’s primary facilities are located on 630 acres, of which 283 are currently developed for fabrication activities with 347 acres available for future expansion. These facilities allow the Company to build jackets for installation in water depths of up to 800 feet and deck sections for fixed or floating production platforms for use in unlimited water depths. In addition, the Company is able to build certain hull sections of floating production platforms, typically for use in water depths greater than 1,000 feet.

On January 2, 1997, Gulf Island Fabrication, Inc. acquired Dolphin Services, Inc. and two related companies (collectively, “Dolphin Services”), which perform offshore and inshore fabrication and construction services (the “Dolphin Acquisition”), and in April 1997, completed the initial public offering (the “Initial Public Offering”) of its common stock, no par value per share (the “Common Stock”). Effective January 1, 1998, the Company acquired all of the outstanding shares of Southport, Inc. (reorganized effective December 31, 2002 as “Southport, L.L.C.,” a Louisiana limited liability company) and it’s wholly owned subsidiary Southport International, Inc. (collectively “Southport”). Southport specializes in the fabrication of living quarters for offshore platforms.

In April 1998 the Company formed a limited liability company called MinDOC, L.L.C. to patent, design and market a deepwater floating, drilling, and production concept (“MinDOC”). During 2001, three of the participants terminated their respective interests in MinDOC, L.L.C. thus, effective October 1, 2001, the Company owns a 60% interest in MinDOC, L.L.C. and the balance is owned by an architectural/engineering company. Prior to October 1, 2001, the Company’s investment in MinDOC, L.L.C. was accounted for under the equity method of accounting for investments with its share of operating results included in other income as an expense in the statements of income. Effective October 1, 2001, the Company’s investment in MinDOC, L.L.C. and resulting operations were consolidated within the consolidated financial statements of Gulf Island Fabrication, Inc.

In November 1999 the Company announced that it had formed a wholly owned subsidiary, Gulf Island MinDOC Company (“GIMCO”), to develop and market deepwater oil and gas production structures, including a MinDOC, the deepwater floating, drilling, and production concept that the Company has a proprietary interest in. When fully operational, the subsidiary will be headquartered in Houston, Texas.

Effective as of January 1, 2000, all of the operating assets, buildings and properties owned directly by the Company were placed in Gulf Island, L.L.C., a wholly owned subsidiary formed to conduct all of the fabrication and other operations previously conducted directly by the Company. As a result, the existing Gulf Island Fabrication, Inc. now serves as a holding company and conducts all of its operations through its subsidiaries.

1

Table of Contents

Index to Financial Statements

Website and Electronic Posting Disclosures

The Company’s website address is www.gulfisland.com. The Company makes available, on or through its website, without charge and on the day such material is filed with the Securities and Exchange Commission (“SEC”), its annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports. The SEC also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The SEC’s website address is www.sec.gov. Our website and the information contained therein or connected thereto are not intended to be incorporated into this report on Form 10-K.

Description of Operations

The Company’s primary activity is the fabrication of offshore drilling and production platforms, including jackets and deck sections of fixed production platforms, hull and/or deck sections of floating production platforms (such as TLPs, SPARs, and FPSOs), piles, wellhead protectors, subsea templates and various production, compressor and utility modules. The Company also has the ability to produce and repair pressure vessels used in the oil and gas industry, refurbish existing platforms and fabricate various other types of steel structures. With its acquisition of Southport, the Company has also increased its presence in the market for the fabrication of living quarters for installation on such platforms.

The Company uses the latest welding and fabrication technology available, and all of the Company’s products are manufactured in accordance with industry standards and specifications, including those published by the American Petroleum Institute, the American Welding Society and the American Society of Mechanical Engineers. The quality management systems of all the Company’s operating subsidiaries are certified as ISO 9001-2000 quality assurance programs. See “—Safety and Quality Assurance.”

Fabrication of Offshore Platforms. The Company fabricates structural components of fixed platforms for use in the offshore development and production of oil and gas. A fixed platform is the traditional type of platform used for the offshore development and production of oil and gas, although in recent years there has been an increase in the use of floating production platforms as a result of increased drilling and production activities in deeper waters. Most fixed platforms built today can accommodate both drilling and production operations. These combination platforms are large and generally more costly than single-purpose structures. However, because directional drilling techniques permit a number of wells to be drilled from a single platform and because drilling and production can take place simultaneously, combination platforms are often more cost effective.

The most common type of fixed platform consists of a jacket (a tubular steel, braced structure extending from the mudline on the seabed to a point above the water surface) which is supported on tubular pilings driven deep into the seabed and supports the deck structure located above the level of storm waves. The deck structure, extending above the surface of the water and attached to the tubular pilings extending out of the top end of the jacket, is designed to accommodate multiple functions, including drilling, production, separating, gathering, piping, compression, well support and crew quartering. Platforms can be joined by bridges to form complexes of platforms for very large developments or to improve safety by dividing functions among specialized platforms. Jacket-type platforms are generally the most viable solution for water depths of 1,000 feet or less. Although there is no height limit to the size of the jackets that can be fabricated at the Company’s facilities, the dimensions of the Houma Navigation Canal prevent the transportation to the Gulf of Mexico of most jackets designed for water depths exceeding 800 feet. The Company can, however, build decks, piping and equipment modules, living quarters, piles and other components of platforms for installation in any water depth. Often, customers split projects among fabricators, contracting with different companies for the fabrication of the jacket, deck sections, living quarters and piles for the same platform. Through the construction of these components the Company participates in the construction of platforms requiring jackets and/or hulls that are larger than those the Company can transport through the Houma Navigation Canal.

Most of the steel used in the Company’s operations arrives at the Company’s fabrication yards as steel plate. The plate is cut and rolled into tubular sections at rolling mills in the fabrication yards. The tubular sections

2

Table of Contents

Index to Financial Statements

(which vary in diameter, up to 12 feet) are welded together in long straight tubes to become legs or into shorter tubes to become part of the network of bracing that supports the legs. Various cuts and welds in the fabrication process are made by computer-controlled equipment that operates from data developed during the design of the structure. The Company’s ability to fabricate and assemble the large tubular sections needed for jackets built for use in water depths over 300 feet distinguish the Company from all but three of its domestic competitors.

Jackets are built on skidways (which are long parallel rails along which the jacket will slide when it is transferred to a barge for towing out to sea) and are generally built in sections so that much of their fabrication is done on the ground. As each section of legs and bracing is complete, large crawler cranes pick up an entire side and “roll up” the section, which is then joined to another uprighted section. When a jacket is complete and ready for launch, it is pulled along the skidway onto a launch barge, which is gradually deballasted to compensate for the weight of the structure as more of it moves aboard the barge. Using ocean-going tugs, the barge and jacket are transported to the offshore installation site.

Decks are built either as single structures or in sections and are installed on location by marine construction contractors. The composition and quantity of petroleum in the well stream generally determine the makeup of the production deck on a processing platform. Typical deck equipment includes crude oil pumps, gas and oil separators and gas compressors. Unlike large jackets, which are transported in a horizontal position, decks are transported upright and, as a result, are not subject to the width restrictions of the Houma Navigation Canal. Therefore, the only limitation on the Company’s ability to fabricate decks is the weight capacity of the barges that transport the decks from the Company’s yard to the installation site. Barges currently exist that have the weight capacity and other characteristics required to transport even the largest of the decks currently installed in the Gulf of Mexico, and management believes that currently there are no decks installed in the Gulf of Mexico that could not have been constructed at the Company’s facilities. While larger deck structures to be built in the future could exceed the capacities of currently existing barges, management does not believe that this will materially affect its share of the market for deck construction.

The Company can also fabricate sections of, and structures used in connection with, TLPs. TLPs consist of a deck that sits atop one or more column-shaped hulls, which are positioned on site with vertical tendons running from the hulls to the seabed. The tendons hold the hulls partially submerged and are highly tensioned using the buoyancy of the hulls. This system develops a restoring force against wave, wind and current actions in proportion to the lateral displacement of the vessel. Wells for a TLP are often pre-drilled through a subsea template. Long, flexible production risers, which carry the petroleum to the deck of the TLP, are supported in tension by mechanical tensioner machines on the platform’s deck and are directly subject to wave, wind and current forces. TLPs can be used in any water depth and are generally better suited than fixed platforms for water depths greater than 1,000 feet.

The size of a TLP depends on a number of factors, including the intended scope of production of the platform, the length of the production risers connected to the platform, the size of the deck to be installed on the platform and the water depth for which the platform is designed. The Company can fabricate deck sections for use with TLPs of any size. The constraints of the Houma Navigation Canal, however, limit the Company’s ability to deliver certain hulls for use with TLPs, depending on the size and weight of the hull sections. The Company has completed the fabrication of the deck section and floating hull of TLPs designed for installation in 1,800 and 3,200 feet of water and believes that these are the first two TLPs of this size to be constructed entirely in the United States. With TLP’s and other floating concepts as the alternative of choice for deepwater drilling and production platforms, and the Company’s participation in this arena firmly established, the Company will participate in the continued expansion into the deepwater areas.

The Company has fabricated subsea templates for use in connection with TLPs, which are structures that are installed on the seabed before development drilling begins. As exploration and drilling move into the deepwater of the Gulf of Mexico, the Company believes that there will be increased opportunities to fabricate subsea templates, as well as decks and other structures, for use in connection with TLPs.

3

Table of Contents

Index to Financial Statements

The Company also fabricates piles and other rolled goods, templates, bridges for connecting offshore platforms, wellhead protectors, various production, compressor and utility modules and other structures used in offshore oil and gas production and development activities. All of the Company’s products are installed by marine construction contractors.

Through Dolphin Services, the Company also provides interconnect piping services on offshore platforms, inshore steel and wood structure construction, fabrication of pressure vessels and large and small packaged skid units, and steel warehousing and sales. Interconnect piping services involve sending employee crews to offshore platforms that have been installed in the Gulf of Mexico in order to perform welding and other activities required to connect production equipment, service modules and other equipment to a platform prior to its becoming operational. Dolphin Services also contracts with oil and gas companies that have platforms and other structures located in the inland lakes and bays throughout the Southeast for various on-site construction and maintenance activities. At its existing facility located a quarter of a mile from the Company’s main yard, Dolphin Services can fabricate jackets up to 100 feet tall along with decks and other steel structures. Dolphin Services has also been active in the refurbishment of existing platforms. Platform operators occasionally remove platforms previously installed in the Gulf of Mexico and return the platforms to a fabricator for refurbishment, which usually consists of general repairs, maintenance work and modification.

Through Southport, the Company fabricates living quarters, primarily for offshore platforms, ranging in size from 4 to 250 beds.

Facilities and Equipment

Facilities. The Company’s corporate headquarters and Gulf Island, L.L.C.’s main fabrication yard are located on the east bank of the Houma Navigation Canal at Houma, Louisiana, approximately 30 miles from the Gulf of Mexico. This facility is situated on approximately 140 acres, of which 100 acres are developed for fabrication, and includes one 25,000 square foot building that houses administrative staff, 267,000 square feet of covered fabrication area, over 17,000 square feet of warehouse storage area and 8,000 square feet of training and medical facilities. The main yard also has approximately 2,800 linear feet of water frontage, of which 1,500 feet is steel bulkhead that permits loadout of heavy structures.

Gulf Island, L.L.C.’s west yard is located across the Houma Navigation Canal from the main yard on 437 acres, 130 acres of which are developed for fabrication and over 300 acres of which are unimproved land that could be used for expansion. The west yard, which has approximately 72,000 square feet of covered fabrication area and 4,600 square feet of warehouse storage area, spans 6,750 linear feet of the Houma Navigation Canal, of which 2,350 feet is steel bulkhead.

Dolphin Services operates from a 30-acre site located approximately a quarter of a mile from Gulf Island L.L.C.’s main yard on a channel adjacent to the Houma Navigation Canal. The facility includes a 9,900 square foot building that houses administrative staff, approximately 32,000 square feet of covered fabrication area, 1,500 square feet of warehouse storage area, a 10,000 square foot blasting and coating facility and approximately 990 linear feet of water frontage, of which 660 feet is steel bulkhead. Dolphin Services also operates a commercial steel sales division and a pressure vessel shop. The steel sales division operates a three acre facility adjacent to Gulf Island, L.L.C.’s main yard with a product line that includes pressure vessel plates and other products that utilize Gulf Island, L.L.C.’s capability to process the steel by cutting, shaping, forming and painting.

The vessel shop can manufacture pressure vessels up to eleven feet in diameter and eight inches in thickness. The shop is equipped with a Cypress Circle Cutter, auto core flux and submerged arc welding equipment. The vessel shop can also accommodate the construction of a 50 ton skid unit inside the facility.

Southport operates on the east bank of the Houma Navigation Canal across Thompson Road from Gulf Island, L.L.C.’s main fabrication yard. The facility covers 23 acres and includes a two-story, 5,000 square foot

4

Table of Contents

Index to Financial Statements

administration building with an attached 5,300 square foot warehouse. Also located on the property is an additional two-story, 2,100 square foot administration building. The property has approximately 1,850 linear feet of water frontage, of which 380 linear feet is steel bulkhead that permits docking of large ocean going vessels and the loadout of heavy loads.

The Company owns all of the foregoing properties.

Equipment. Gulf Island, L.L.C.’s main yard houses its Model 34 and Model 20 plate bending rolls, a Frye Wheelabrator and a U.S. Filter grit blast systems, a hydraulic plate shear, a hydraulic press brake and various other equipment needed to build offshore structures and fabricate steel components. Gulf Island, L.L.C.’s west yard has a Bertsch Model 38 plate bending roll, a computerized Vernon brace coping machine used for cutting steel in complex geometric sections and various other equipment used in the Company’s fabrication business. Gulf Island, L.L.C. has a computerized numeric controlled plasma-arc cutting system that cuts and bevels steel up to one inch thick at a rate of two hundred inches per minute. The system can also etch into steel for piece markings and layout markings at a rate of three hundred inches per minute. Gulf Island, L.L.C. also owns 16 crawler cranes, which range in tonnage capacity from 150 to 500 tons each and service both of Gulf Island, L.L.C.’s yards. Gulf Island, L.L.C. may rent additional cranes on a monthly basis in times of very high activity levels. In 2002, Gulf Island, L.L.C. purchased four, rubber tired, hydraulic modular transporters (KAMAG—Type 2406) that allow fabricated deck sections that weigh as much as 800 tons to be transported around the facility. In December 2003, the Company signed an agreement to purchase two additional (KAMAG—Type 2406) transporters to be delivered late second quarter 2004. The transporters allow easier load-out of smaller decks and they provide more agility for the movement of deck sections throughout the yard than cranes. Gulf Island, L.L.C. performs routine repairs and maintenance on all of its equipment.

Gulf Island, L.L.C.’s plate bending rolls allow it to roll and weld into tubular pipe sections approximately 50,000 tons of plate per year. By having such capacity at its fabrication facility, Gulf Island, L.L.C. is able to coordinate all aspects of platform construction, thereby reducing the risk of cost overruns, delays in project completion, and labor costs. In addition, these facilities allow Gulf Island, L.L.C. to participate as subcontractor on projects awarded to other contractors. The Company has a state of the art, fully enclosed, and environmentally friendly blast and coating facility that can operate 24 hours a day. The facility is automated and provides blasting and coating activities in support of the Company’s fabrication projects. The design output of the facility also allows the Company to provide blast and paint services to the local shipbuilding industry. The use of this equipment provides the Company a competitive advantage by reducing labor costs and demonstrates the Company’s commitment to being a good neighbor to the community and the environment.

Dolphin Services owns three spud barges and leases one for use in connection with its inshore construction activities. Each barge is equipped with a crane with a lifting capacity of 60 to 100 tons each. Dolphin Services also owns two Manitowoc 4100 cranes with lifting capacities of 200 to 230 tons each and two smaller crawler cranes with lifting capacities of 60 tons each.

Materials and Supplies

The principal materials and supplies used by the Company in its fabrication business, standard steel shapes, steel plate, welding gases, fuel oil, gasoline and paint, are currently available from many sources, and the Company does not depend upon any single supplier or source. However, the continued consolidation of the domestic steel industry and an increased demand from China has put a strain on the worldwide supply of raw materials required to produce steel. China currently consumes one-third of the world output of rolled steel. Steel delivery times and pricing per ton have increased over the past 2 months. What was a standard delivery of 6-8 weeks for steel has risen to 18-24 weeks for heat treated as well as standard material. In addition the weak U.S. dollar together with growing global demand has allowed U.S. steel mills to increase prices. To cover the increased cost of the raw materials, steel companies are adding surcharges on steel. These surcharges change every month with no end in sight and are typically passed on to the customer.

5

Table of Contents

Index to Financial Statements

Safety and Quality Assurance

Management is concerned with the safety and health of the Company’s employees and maintains a stringent safety assurance program to reduce the possibility of costly accidents. The Company’s safety department establishes guidelines to ensure compliance with all applicable state and federal safety regulations and provides training and safety education through orientations for new employees and subcontractors, daily crew safety meetings and first aid and CPR training. The Company also employs six in-house medical personnel. The Company has a comprehensive drug program and conducts periodic employee health screenings. A safety committee, whose members consist of management representatives and peer-elected field representatives, meets twice a month to discuss safety concerns and suggestions that could prevent accidents. The Company also rewards its employees with safety awards every three months. These awards are the result of observations and audits performed by the safety department and front line supervision.

The Company fabricates to the standards of the American Petroleum Institute, the American Welding Society, the American Society of Mechanical Engineers and specific customer specifications. The Company uses welding and fabrication procedures in accordance with the latest technology and industry requirements. Training programs have been instituted to upgrade skilled personnel and maintain high quality standards. In addition, the Company maintains on-site facilities for the non-destructive testing of all welds, which process is performed by an independent contractor.

The quality management systems of Gulf Island, L.L.C., Dolphin Services and Southport are certified as ISO 9001-2000 programs. ISO 9001-2000 is an internationally recognized verification system for quality management overseen by the International Standard Organization based in Geneva, Switzerland. The certification is based on a review of the Company’s programs and procedures designed to maintain and enhance quality production and are subject to annual review and recertification.

Customers and Contracting

The Company’s customers are primarily major and independent oil and gas exploration and production companies. The Company also may perform work as a sub-contractor for one or more of its competitors. Over the past five years, sales of structures used in the Gulf of Mexico by oil and gas exploration and production companies accounted for approximately 80% of the Company’s revenue. The balance of its revenue was derived from the fabrication of structures installed outside the Gulf of Mexico, including offshore Canada, West Africa and Latin America.

A large portion of the Company’s revenue has historically been generated by a few customers, although not necessarily the same customers from year-to-year. For example, the Company’s largest customers (those which individually accounted for more than 10% of revenue in a given year) accounted for 43% of revenue (22% J. Ray McDermott, S.A., 11% Kerr McGee Corporation, and 10% El Paso Corporation) in 2003, 51% of revenue (20% Single Buoy Mooring, Inc., 19% Kerr-McGee Corporation, and 12% ExxonMobil Corporation) in 2002, and 21% of revenue (El Paso Corporation which includes projects for a subsidiary of the Coastal Corporation prior to its merger with El Paso Corporation) in 2001. In addition, at December 31, 2003, 92% of the Company’s backlog, which consist of work remaining at December 31, 2003 and commitments received since December 31, 2003, was attributable to 13 projects involving seven customers. Because the level of fabrication that the Company may provide to any particular customer depends, among other things, on the size of that customer’s capital expenditure budget devoted to platform construction plans in a particular year and the Company’s ability to meet the customer’s delivery schedule. Customers that account for a significant portion of revenue in one fiscal year may represent an immaterial portion of revenue in subsequent years.

While customers may consider other factors, including the availability, capability, reputation and safety record of a contractor, price and the ability to meet a customer’s delivery schedule are the principal factors on which the Company is awarded contracts. The Company’s contracts generally vary in length from one month to twenty-four months depending on the size and complexity of the project. Generally, the Company’s contracts and

6

Table of Contents

Index to Financial Statements

projects are subject to termination at any time prior to completion, at the option of the customer. Upon termination, however, the customer is generally required to pay the Company for work performed and materials purchased through the date of termination and, in some instances, cancellation fees.

Most of the Company’s projects are awarded on a fixed-price or alliance/partnering basis. Under fixed-price contracts, the Company receives the price fixed in the contract, subject to adjustment only for change orders approved by the customer. As a result, the Company retains all cost savings but is also responsible for all cost overruns. Under typical alliance/partnering arrangements, the Company and the customer agree in advance to a target price that includes specified levels of labor and material costs and profit margins. If the project is completed at less cost than that targeted in the contract, the contract price is reduced by a portion of the savings. If the cost of completion is greater than that targeted in the contract, the contract price is increased, but generally to the target price plus the actual incremental cost of materials and direct labor costs. Accordingly, under alliance/partnering arrangements, the Company has some protection from cost overruns but also shares a portion of any cost savings with the customer. Under cost-plus arrangements, the Company receives a specified fee in excess of its direct labor and material cost and so is protected against cost overruns but does not benefit directly from cost savings. Because the Company generally prices materials as pass-through items on its contracts, the cost and productivity of the Company’s labor force are the primary factors affecting the Company’s operating costs. Consequently, it is essential that the Company control the cost and productivity of the direct labor hours worked on the Company’s projects. As an aid to achieving this control, the Company places a single project manager in charge of the production operations related to each project and gives significant discretion to the project manager, with oversight by the applicable subsidiary’s President and the Company’s Executive Vice President of Operations. As an incentive to control costs, the Company gives bonuses to its employees totaling 5% of the Company’s income before taxes.

Seasonality

Although high activity levels in the oil and gas industry and capacity limitations can somewhat diminish the seasonality of the Company’s operations, the Company’s operations have historically been subject to seasonal variations in weather conditions and daylight hours. Since most of the Company’s construction activities take place outdoors, the number of direct labor hours worked generally declines during the winter months due to an increase in rainy and cold conditions and a decrease in daylight hours. In addition, the Company’s customers often schedule the completion of their projects during the summer months in order to take advantage of the milder weather during such months for the installation of their platforms. As a result, a disproportionate portion of the Company’s income in past years had been earned during the second and third quarters of the year. In 2003 and 2002, seasonality had less of an impact on income, mainly due to the Company’s ongoing investment in machinery and equipment and covered fabrication areas.

The table below indicates for each quarter of the Company’s last three fiscal years the percentage of the annual revenue, gross profit and net income, and the number of direct labor hours worked.

7

Table of Contents

Index to Financial Statements

Because of this seasonality, full year results are not likely to be a direct multiple of any particular quarter or combination of quarters. Reductions in industry activity levels may tend to increase the seasonality of the Company’s operations.

Competition

The offshore platform fabrication industry is highly competitive and influenced by events largely outside of the control of offshore platform fabrication companies. Platform fabrication companies compete intensely for available projects, which are generally awarded on a competitive bid basis with customers usually requesting bids on projects one to three months prior to commencement. The Company’s marketing staff contacts oil and gas companies believed to have fabrication projects scheduled to allow the Company an opportunity to bid for the projects. Although price and the contractor’s ability to meet a customer’s delivery schedule are the principal factors in determining which qualified fabricator is awarded a contract for a project, customers also consider, among other things, the availability of technically capable personnel and facility space, a fabricator’s efficiency, condition of equipment, reputation, safety record and customer relations.

The Company currently has three primary domestic competitors, Technip-Coflexip (specifically its subsidiaries CSO Aker Marine Contractors, Inc. and Gulf Marine Fabricators, Inc.), J. Ray McDermott, S.A., and Kiewit Offshore Services, for the fabrication of platform jackets to be installed in the Gulf of Mexico in water depths greater than 300 feet. In addition to these three companies, the Company primarily competes with five other fabricators for platform jackets for intermediate water depths from 150 feet to 300 feet. A number of other companies compete for projects designed for shallower waters as well as for the projects typically performed by Southport. Certain of the Company’s competitors have greater financial and other resources than the Company.

Management believes that, while new competitors can enter the market for smaller structures relatively easily, it is more difficult to enter the market for jackets designed for use in water depths greater than 300 feet. This difficulty results from the substantial investment required to establish an adequate facility, the difficulty of locating a facility adjacent to an adequate waterway due to environmental and wetland regulations, and the limited availability of experienced supervisory and management personnel.

Management believes that the Company’s competitive pricing, expertise in fabricating offshore structures and the certification of its facilities as ISO 9001-2000 fabricators will enable it to continue to compete effectively for projects destined for international waters. The Company recognizes, however, that foreign governments often use subsidies and incentives to create jobs where oil and gas production is being developed. In addition, the increased transportation costs that are incurred when exporting structures from the U.S. to foreign locations may hinder the Company’s ability to successfully bid for projects against foreign competitors. Because of subsidies, import duties and fees, taxes on foreign operators, lower wage rates in foreign countries, fluctuations in the value of the U.S. dollar, the possible imposition of tariffs on raw materials imported into the United States and other factors, the Company may not be able to remain competitive with foreign contractors for projects designed for use in international waters as well as those designed for use in the Gulf of Mexico.

Backlog

As of December 31, 2003, the Company’s revenue backlog, which consists of work remaining at December 31, 2003 and commitments received through the fourth quarter earnings release, was $99.2 million ($79.0 million of which management expects to be performed during 2004) and its man-hour backlog was 1.31 million hours remaining to work. Of the $99.2 million revenue backlog at December 31, 2003, approximately 92% of the Company’s backlog was attributable to seven customers.

The Company’s backlog is based on management’s estimate of the direct labor hours required to complete, and the remaining revenue to be recognized with respect to, those projects as to which a customer has authorized the Company to begin work or purchase materials pursuant to written contracts, letters of intent or other forms of authorization received by our Company. Often, however, management’s estimates are based on incomplete engineering and design specifications. As engineering and design plans are finalized or changes to existing plans

8

Table of Contents

Index to Financial Statements

are made, management’s estimate of the direct labor hours required to complete and price at completion for such projects is likely to change. In addition, all projects currently included in the Company’s backlog are subject to termination at the option of the customer, although the customer in that case is generally required to pay the Company for work performed and materials purchased through the date of termination and, in some instances, pay the Company cancellation fees.

Government and Environmental Regulation

Many aspects of the Company’s operations and properties are materially affected by federal, state and local regulations, as well as certain international conventions and private industry organizations. The exploration and development of oil and gas properties located on the outer continental shelf of the United States is regulated primarily by the Bureau of Minerals Management Service of the United States Department of the Interior (“MMS”). The MMS has promulgated federal regulations under the Outer Continental Shelf Lands Act requiring the construction of offshore platforms located on the outer continental shelf to meet stringent engineering and construction specifications. Violations of these regulations and related laws can result in substantial civil and criminal penalties as well as injunctions curtailing operations. The Company believes that its operations are in compliance with these and all other regulations affecting the fabrication of platforms for delivery to the outer continental shelf of the United States. In addition, the Company depends on the demand for its services from the oil and gas industry and, therefore, can be affected by changes in taxes, price controls and other laws and regulations relating to the oil and gas industry. Offshore construction and drilling in certain areas has also been opposed by environmental groups and, in certain areas, has been restricted. To the extent laws are enacted or other governmental actions are taken that prohibit or restrict offshore construction and drilling or impose environmental protection requirements that result in increased costs to the oil and gas industry in general and the offshore construction industry in particular, the business and prospects of the Company could be adversely affected, although such restrictions in the areas of the Gulf of Mexico where the Company’s products are used have not been substantial. The Company cannot determine to what extent future operations and earnings of the Company may be affected by new legislation, new regulations or changes in existing regulations.

The Houma Navigation Canal provides the only means of access for the Company’s products from the Company’s facilities to open waters. The Houma Navigation Canal is considered to be a navigable waterway of the United States and, as such, is protected by federal law from unauthorized obstructions that would hinder water-borne traffic. Federal law also authorizes federal maintenance of the canal by the United States Corps of Engineers. The canal requires bi-annual dredging to maintain its water depth and, while federal funding for this dredging has been provided for over 30 years, there is no assurance that Congressional appropriations sufficient for adequate dredging and other maintenance of the canal will be continued indefinitely. If sufficient funding were not appropriated for that purpose, the Houma Navigation Canal could become impassable by barges required to transport many of the Company’s products and could result in material and adverse affects on the Company’s operations and financial position.

The Company’s operations and properties are subject to a wide variety of increasingly complex and stringent foreign, federal, state and local environmental laws and regulations, including those governing discharges into the air and water, the handling and disposal of solid and hazardous wastes, the remediation of soil and groundwater contaminated by hazardous substances and the health and safety of employees. These laws may provide for “strict liability” for damages to natural resources and threats to public health and safety, rendering a party liable for the environmental damage without regard to negligence or fault on the part of such party. Sanctions for noncompliance may include revocation of permits, corrective action orders, administrative or civil penalties and criminal prosecution. Certain environmental laws provide for strict, joint and several liability for remediation of spills and other releases of hazardous substances, as well as damage to natural resources. In addition, the Company may be subject to claims alleging personal injury or property damage as a result of alleged exposure to hazardous substances. Such laws and regulations may also expose the Company to liability for the conduct of or conditions caused by others, or for acts of the Company that were in compliance with all applicable laws at the time such acts were performed.

9

Table of Contents

Index to Financial Statements

The Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended, and similar laws provide for responses to and liability for releases of hazardous substances into the environment. Additionally, the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, the Safe Drinking Water Act, the Emergency Planning and Community Right to Know Act, each as amended, and similar foreign, state or local counterparts to these federal laws, regulate air emissions, water discharges, hazardous substances and wastes, and require public disclosure related to the use of various hazardous substances. Compliance with such environmental laws and regulations may require the acquisition of permits or other authorizations for certain activities and compliance with various standards or procedural requirements. The Company believes that its facilities are in substantial compliance with current regulatory standards.

The Company’s operations are also governed by laws and regulations relating to workplace safety and worker health, primarily the Occupational Safety and Health Act and regulations promulgated thereunder. In addition, various other governmental and quasi-governmental agencies require the Company to obtain certain permits, licenses and certificates with respect to its operations. The kinds of permits, licenses and certificates required in the Company’s operations depend upon a number of factors. The Company believes that it has all material permits, licenses and certificates necessary for the conduct of its existing business.

The Company’s compliance with these laws and regulations has entailed certain additional expenses and changes in operating procedures, which during the last three years have resulted in approximately $200,000 to $300,000 of expenditures per year. The Company believes that compliance with these laws and regulations will not have a material adverse effect on the Company’s business or financial condition for the foreseeable future. However, future events, such as changes in existing laws and regulations or their interpretation, more vigorous enforcement policies of regulatory agencies, or stricter or different interpretations of existing laws and regulations, may require additional expenditures by the Company, which expenditures may be material.

Certain activities engaged in by employees of the Company, including interconnect piping and other service activities conducted on offshore platforms and activities performed on the spud barges owned by the Company, are covered by the provisions of the Jones Act, the Death on the High Seas Act and general maritime law, which laws operate to make the liability limits established under state workers’ compensation laws inapplicable to these employees and, instead, permit them or their representatives to pursue actions against the Company for damages or job related injuries, with generally no limitations on the Company’s potential liability. The Company’s ownership and operation of vessels can give rise to large and varied liability risks, such as risks of collisions with other vessels or structures, sinkings, fires and other marine casualties, which can result in significant claims for damages against both the Company and third parties for, among other things, personal injury, death, property damage, pollution and loss of business.

In addition to government regulation, various private industry organizations, such as the American Petroleum Institute, the American Society of Mechanical Engineers and the American Welding Society, promulgate technical standards that must be adhered to in the fabrication process.

Insurance

The Company maintains insurance against property damage caused by fire, flood, explosion and similar catastrophic events that may result in physical damage or destruction to the Company’s facilities. All policies are subject to deductibles and other coverage limitations. The Company also maintains a builder’s risk policy for its construction projects and general liability insurance. The Company and its subsidiary, Gulf Island, L.L.C., are self-insured for workers’ compensation liability except for losses in excess of $300,000 per occurrence for Louisiana workers’ compensation and for U.S. longshoreman and harbor workers’ coverage. Dolphin Services and Southport are conventionally insured for workers’ compensation liability with deductibles of $100,000 and $25,000, respectively. The Company also maintains maritime employer’s liability insurance. Although management believes that the Company’s insurance is adequate, there can be no assurance that the Company will be able to maintain adequate insurance at rates which management considers commercially reasonable, nor can there be any assurance that such coverage will be adequate to cover all claims that may arise.

10

Table of Contents

Index to Financial Statements

Employees

The Company’s workforce varies based on the level of ongoing fabrication activity at any particular time. During 2003, the number of Company employees ranged from approximately 930 to 1,100. As of February 9, 2004, the Company had approximately 1,085 employees. Although the seasonality of the Company’s operations may cause a decline in Company output during the winter months, the Company generally does not lay off employees during those months but reduces the number of hours worked per day by many employees to coincide with the reduction in daylight hours during that period. None of the Company’s employees are employed pursuant to a collective bargaining agreement, and the Company believes that its relationship with its employees is good.

The Company’s ability to remain productive and profitable depends substantially on its ability to attract and retain skilled construction workers, primarily welders, fitters and equipment operators. In addition, the Company’s ability to expand its operations depends not only upon customer demand but also on the Company’s ability to increase its labor force. The demand for such workers is high and the supply is extremely limited, especially during periods of high activity in the oil and gas industry. While the Company believes its relationship with its skilled labor force is good, a significant increase in the wages paid by competing employers could result in a reduction in the Company’s skilled labor force, increases in the wage rates paid by the Company, or both. If either of these occurred, in the near-term, the profits expected by the Company from work in progress could be reduced or eliminated and, in the long-term, to the extent such wage increases could not be passed on to the Company’s customers, the production capacity of the Company could be diminished and the growth potential of the Company could be impaired.

As part of an effort to maintain its workforce, the Company has instituted and enhanced several incentive programs and expanded its training facility for its current employees. The Company has facilities to train its employees on productivity and safety matters. The Company is committed to training its employees and offers advancement through in-house and outsourced training programs for skilled craft, supervisory and management personnel.

Cautionary Statement Concerning Forward-Looking Information

Certain statements included in this report and in oral statements made from time to time by management of the Company that are not statements of historical fact are forward-looking statements. In this report, forward-looking statements are included primarily in the sections entitled “Business and Properties,” “Legal Proceedings,” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The words “expect,” “believe,” “anticipate,” “project,” “plan,” “estimate,” “predict” and similar expressions often identify forward-looking statements. All such statements are subject to factors that could cause actual results and outcomes to differ materially from the results and outcomes predicted in the statements and investors are cautioned not to place undue reliance upon them. These factors include, among others, the timing and extent of changes in the prices of crude oil and natural gas; the timing of new projects and the Company’s ability to obtain them; competitive factors in the heavy marine fabrication industry; and the Company’s ability to successfully complete the testing, production and marketing of the MinDOC and other deepwater production systems and to develop and provide financing for them.

Item 3. Legal Proceedings

The Company is subject to various routine legal proceedings in the normal conduct of its business primarily involving commercial claims, workers’ compensation claims, and claims for personal injury under general maritime laws of the United States and the Jones Act. While the outcome of these lawsuits, legal proceedings and claims cannot be predicted with certainty, management believes that the outcome of any such proceedings, even if determined adversely, would not have a material adverse effect on the financial position, results of operations or cash flows of the Company.

11

Table of Contents

Index to Financial Statements

Item 4. Submission of Matters to a Vote of Security Holders

Not applicable.

Executive Officers of the Registrant

Listed below are the names, ages and offices held by each of the executive officers of the Company as of February 9, 2004. All officers of the Company serve at the pleasure of the Company’s Board of Directors.

Kerry J. Chauvin has served as Chairman of the Board since April 2001. Mr. Chauvin has served as the Company’s President since the Company’s inception and as Chief Executive Officer since January 1990. Mr. Chauvin also served as the Company’s Chief Operating Officer from January 1989 to January 1990.

Kirk J. Meche became Executive Vice President—Operations of the Company and President of Gulf Island, L.L.C. in February 2001. Mr. Meche served as President of Southport, Inc., a former wholly owned subsidiary of the Company, from December 1999 to February 2001, and as Vice President of Operations of Southport, Inc. from February 1999 to December 1999. He was a Project Manager for the Company from 1996 to 1999.

Murphy A. Bourke has been Executive Vice President—Marketing since January 2000, and was Vice President – Marketing since the Company began operations in 1985 until December 1999.

Joseph P. “Duke” Gallagher, III was elected Vice President—Finance and Chief Financial Officer of the Company in January 1997. Mr. Gallagher served as the Company’s Controller from 1985 until 1997. He has been the Company’s Treasurer since 1986 and served as the Company’s Secretary from January 1993 until April 1999.

12

Table of Contents

Index to Financial Statements

PART II

Item 5. Market for Registrant’s Common Equity and Related Stockholder Matters

The Company’s common stock is traded on the Nasdaq National Market under the symbol “GIFI.” At February 9, 2004, the Company had approximately 2,500 holders of record of its common stock.

The following table sets forth the high and low bid prices per share of the common stock, as reported by the Nasdaq National Market, for each fiscal quarter of the two most recent fiscal years.

The Company did not pay dividends in 2003 or 2002. On February 4, 2004, the Company’s Board of Directors declared a dividend of $0.05 per share on shares of the Company’s common stock outstanding, payable February 27, 2004, to shareholders of record on February 17, 2004. The future declaration and payment of dividends, if any, is at the discretion of the Board of Directors and will depend on the Company’s retained earnings, working capital requirements and the future operation and growth of its business and other factors deemed relevant by the Board of Directors.

Information as to the securities authorized for issuance under the Company’s equity compensation plans is incorporated herein by reference to Item 12 of this report on Form 10-K.

13

Table of Contents

Index to Financial Statements

Item 6. Selected Financial Data

The following table sets forth selected historical financial data as of the dates and for the periods indicated. The historical financial data for each year in the five-year period ended December 31, 2003 are derived from the audited financial statements of the Company. The following information should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the Company’s financial statements and notes thereto included elsewhere in this report.

14

Table of Contents

Index to Financial Statements

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Introduction and Outlook

The Company’s results of operations are affected primarily by (i) the level of exploration and development activity maintained by oil and gas exploration and production companies in the Gulf of Mexico, and to a lesser extent, foreign locations throughout the world, (ii) the Company’s ability to win contracts through competitive bidding or alliance/partnering arrangements, and (iii) the Company’s ability to manage those contracts to successful completion. The level of exploration and development activity is related to several factors, including trends of oil and gas prices, exploration and production companies’ expectations of future oil and gas prices, and changes in technology that reduce costs and improve expected returns on investment, especially in subsalt geological formations (which generally are located in 300 to 800 feet of water) and in deepwater (800 to 6,000 feet) areas of the Gulf of Mexico. During 1997 and 1998, generally favorable trends in these factors led to high activity levels in the Gulf of Mexico. Beginning in 1999 through 2000, however, the distraction caused by consolidation activity by the oil and gas exploration and production companies and generally unfavorable trends in exploration and development activity, have caused corresponding low levels of oil and gas development activity.

Development activity in water depths greater than 300 feet, where larger structures requiring more steel tonnage are needed, began declining in 1999 and continued to decline throughout 2000. This decline had a negative effect on the demand for the available capacity of the major platform fabricators serving the Gulf of Mexico, which caused a decline in pricing levels for their services through the end of 2000. While 2001, 2002, and 2003 did not result in a significant improvement in market conditions in the fabrication sector of the oil and gas industry, the Company experienced some stability in the awarding of projects during 2001, a notable 28% increase in projects awarded during 2002, and another 16% increase in projects awarded during 2003.

15

Table of Contents

Index to Financial Statements

The combination of the backlog at December 31, 2002, and projects awarded during 2003 with stable profit margins, resulted in a stronger performance in 2003 compared to 2002. Revenue in 2003 was $203.7 million, a 42.5% increase compared to 2002 revenue, and net income was $15.8 million, a 52.8% increase compared to 2002 net income before cumulative effect of change in accounting principle of $10.3 million. Net income after a cumulative effect of change in accounting principle for the period ended December 31, 2002 was $5.6 million (see Note 3 in the Notes to Consolidated Financial Statements). During 2003 the Company was awarded several large projects, resulting in a 7.3% increase in backlog at December 31, 2003, to $99.2 million compared to $92.5 million at December 31, 2002.

The dollar value of projects available in the market is significantly below those levels of four to five years ago. Competition for available projects remains intense and near term, future margins will likely remain uncertain. Cost reduction measures are continuously reviewed to address these conditions. Demand for the Company’s services will continue to depend largely upon actual or anticipated prices for oil and gas, which are difficult to predict. At some point, however, it is expected that demand for the Company’s products and services should recover as oil and gas reserves are reduced and the Company’s customers are forced to replace them.

During 2003, the Company’s workforce increased from approximately 930 to 1,100 employees. Demand for the Company’s products and services dictates the Company’s workforce needs. Although the Company generally tries to minimize the use of contract labor, it will do so when required to meet customer demand.

Critical Accounting Policies and Estimates

The consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States, which require the Company to make estimates and assumptions. The Company believes that of its significant accounting policies (see Note 1 in the Notes to Consolidated Financial Statements), the following involve a higher degree of judgment and complexity.

Revenue Recognition

The majority of the Company’s revenue is recognized on a percentage-of-completion basis based on the ratio of direct labor hours actually performed to date compared to the total estimated direct labor hours required for completion. Accordingly, contract price and cost estimates are reviewed monthly as the work progresses, and adjustments proportionate to the percentage of completion are reflected in revenue for the period when such estimates are revised. If these adjustments were to result in a reduction of previously reported profits, the Company would have to recognize a charge against current earnings, which may be significant depending on the size of the project or the adjustment. Profit incentives from customers are included in revenue when their realization is reasonably assured. Claims for extra work or changes in scope of work are included in revenue when the amount can be reliably estimated and collection is probable. Provisions for estimated losses on uncompleted contracts are recorded in the period in which such losses are determined.

Receivables

In the normal course of business, the company extends credit to its customers on a short-term basis. The company’s principal customers are major oil and natural gas exploration, development and production companies. Although credit risks associated with our customers are considered minimal, the company routinely reviews its accounts receivable balances and makes adequate provisions for probable doubtful accounts. During 2003, the Company recorded a bad debt expense of $188,000, increasing the allowance for doubtful accounts to $226,000, to reflect the reduced probability of collection on a contract.

Results of Operations

Comparison of the Years Ended December 31, 2003 and 2002

The Company’s revenue for the year ended December 31, 2003 was $203.7 million, an increase of 42.5%, compared to $142.9 million in revenue for the year ended December 31, 2002. Revenue increased as a result of

16

Table of Contents

Index to Financial Statements

the increased demand and stable pricing of the Company’s goods and services as indicated by the substantial backlog at the beginning of the year accompanied by the significant material and subcontractor pass-through sales applied to contracts. In addition, the on-going labor recruiting and retention efforts of the Company required to manage the Company’s backlog generated an increase in the volume of direct labor hours applied to contracts for the year ended December 31, 2003, compared to 2002 (2.3 million in 2003 versus 1.9 million in 2002).

Cost of revenue was $174.8 million in 2003 compared to $123.6 million in 2002. Cost of revenue consists of costs associated with the fabrication process, including direct costs (such as direct labor hours, raw materials, subcontractor cost, and contract labor) allocated to specific projects and indirect costs (such as supervisory labor, utilities, welding supplies and equipment costs) associated with production but not directly related to a specific project. Although the Company experienced inefficiencies in production hours caused by the reliance on contract labor man-hours resulting from unfavorable weather conditions in the second and third quarters of 2003, the Company was able to partially regain those efficiencies in the fourth quarter as use of contract labor became less. Consequently, as a percentage of revenue, the cost of revenue decreased slightly to 85.8% for 2003 compared to 86.5% for 2002.

The combination of an increased volume of revenue with stable pricing and a reduction in cost of revenue as a percent of revenue, enabled the Company to increase gross profit by 49.9% to $28.9 million (14.2% of revenue) for the year ended December 31, 2003, compared to the $19.3 million (13.5% of revenue) of gross profit for the year ended December 31, 2002.

The Company’s general and administrative expenses were $5.2 million for the year ended December 31, 2003, compared to $4.2 million for the year ended December 31, 2002. This increase was the result of costs that vary with sales volumes, primarily labor related costs. Also included in general and administrative expenses for 2003 was $188,000 for bad debt expense related to a single contract. Although the absolute dollar cost of the Company’s general and administrative expenses increased for 2003, as a percentage of revenue these costs decreased to 2.5% from 3.0% for the years ended December 31, 2003 and 2002, respectively.

The Company’s net interest income decreased to $174,000 for the year ended December 31, 2003, compared to $572,000 for the year ended December 31, 2002. The current reduction in interest income is the result of cash utilization associated with the increase in capital expenditure levels and the lower yields on short-term investments when comparing 2003 to 2002. For the periods ended December 31, 2003 and 2002, respectively, other income was $19,000 and $52,000, of which the majority was related to the sale of miscellaneous equipment.

Comparison of the Years Ended December 31, 2002 and 2001

The Company’s revenue for the year ended December 31, 2002 was $142.9 million, an increase of 25.7%, compared to $113.7 million in revenue for the year ended December 31, 2001. Revenue increased as a result of the increased demand and stable pricing of the Company’s goods and services. In addition, the on-going labor recruiting and retention efforts at the Company generated an increase in the volume of direct labor hours applied to contracts for the year ended December 31, 2002, compared to 2001(1.9 million in 2002 versus 1.7 million in 2001). The combination of increased volume and stable pricing enabled the Company to increase gross profit by 25.3% to $19.3 million (13.5% of revenue) for the year ended December 31, 2002, compared to the $15.4 million (13.5% of revenue) of gross profit for the year ended December 31, 2001.

Cost of revenue was $123.6 million in 2002 compared to $98.3 million in 2001. Cost of revenue consists of costs associated with the fabrication process, including direct costs (such as direct labor hours and raw materials) allocated to specific projects and indirect costs (such as supervisory labor, utilities, welding supplies and equipment costs) associated with production but not directly related to a specific project. As a percentage of revenue, these costs remained consistent at 86.5% for 2002 and 2001.

17

Table of Contents

Index to Financial Statements

The Company’s general and administrative expenses were $4.2 million for the year ended December 31, 2002, compared to $4.4 million for the year ended December 31, 2001. Included in general and administrative expenses for the year ended December 31, 2001 was $433,000 representing the amortization of goodwill. Effective January 1, 2002, goodwill amortization was eliminated. Thus, excluding goodwill amortization for 2001 would result in an increase of approximately $200,000 for general expenses when comparing 2002 to 2001. This increase for 2001 to 2002 was the result of costs that vary with sales volumes, primarily labor related costs. Although the absolute dollar cost of the Company’s general and administrative expenses increased when excluding goodwill for 2001, as a percentage of revenue these costs decreased to 3.0% from 3.5% for the years ended December 31, 2002 and 2001, respectively.

The Company’s net interest income decreased to $572,000 for the year ended December 31, 2002 compared to $1.1 million for 2001. The current reduction in interest income is the result of a reduction in short-term interest rates when comparing 2002 to 2001. For the period ended December 31, 2002, other income was $52,000, of which the majority was related to the sale of miscellaneous equipment. For the period ended December 31, 2001, other expense was $748,000. This expense includes $288,000 related to the Company’s portion of the net loss of MinDOC, LLC as it continues to design and market the MinDOC floating platform concept for deepwater drilling and production. Also included in the other-net was $280,000 for the settlement of a lawsuit the Company had been involved in for several years and $180,000 resulting from a loss the Company had on the sale of the 13-acre facility Southport previously occupied in Harvey, Louisiana.

Liquidity and Capital Resources

Historically the Company has funded its business activities through funds generated from operations. The Company also maintains a revolving line of credit (“the Revolver”) with a commercial bank, but has not drawn on it since December 1998. At December 31, 2003, the Company’s cash and cash equivalents plus short-term investments totaled $22.1 million. Net cash provided by operating activities was $13.0 million for the year ended December 31, 2003. Working capital was $60.7 million (an increase of 16.1%) at December 31, 2003. The ratio of current assets to current liabilities decreased to 3.93 to 1 at December 31, 2003, from 5.12 to 1 at December 31, 2002. The Company’s primary source of cash is its cash receipts related to contract receivables. In the early phases of a new project, the Company utilizes its cash to purchase material and outside services and increase labor activities, which results in a reduction of cash and an increase in contract receivables. Net cash provided by financing activities for the period ended December 31, 2003 was $737,000 of proceeds from the exercise of stock options. Net cash used in investing activities for the year ended December 31, 2003 was $11.4 million, which included $5.3 million for the purchase of short-term investments, $10.0 million of proceeds from the sale of short-term investments, and $16.1 million of capital expenditures. The Company’s capital expenditures during 2003 were for improvements to its production facilities and for equipment designed to increase the capacity of its facilities and the productivity of its labor force. The majority of the 2003 capital expenditures were for the completion of the new fabrication shop ($3.6 million) and the purchase of two Manitowoc model M2250 cranes ($6.5 million).

The Company’s Revolver provides for a revolving line of credit of up to $20.0 million, which bears interest equal to, at the Company’s option, the prime lending rate established by Bank One Corporation or LIBOR plus 1.5%. The Revolver matures December 31, 2005, and is secured by a mortgage on the Company’s real estate, equipment and fixtures. The Company pays a fee on a quarterly basis of three-sixteenths of one percent per annum on the average unused portion of the line of credit. At December 31, 2003, there were no borrowings outstanding under the credit facility, but the Company did have letters of credit outstanding totaling $3.1 million which reduces the unused portion of the Revolver. The Company is required to maintain certain covenants, including balance sheet and cash flow ratios. At December 31, 2003, the Company was in compliance with these covenants.

The Company’s Board of Directors approved a capital budget of approximately $9.0 million for 2004, which includes the purchase of equipment and additional yard and facility expansion improvements.

18

Table of Contents

Index to Financial Statements

Obligations and Commitments

The following table listing contractual obligations describes the $1.5 million in commitments the Company had at December 31, 2003 (in thousands).

On February 4, 2004, the Company’s Board of Directors declared a dividend of $0.05 per shares of the Company’s common stock outstanding, payable February 27, 2004, to shareholders of record on February 17, 2004. The future declaration and payment of dividends, if any, is at the discretion of the Board of Directors and will depend on retained earnings, working capital requirements, the future operation and growth of its business and other factors deemed relevant by the Board of Directors. Management believes that its available funds, cash generated by operating activities and funds available under the bank credit facility will be sufficient to fund these capital expenditures and its working capital needs. However, the Company may expand its operations through acquisitions in the future, which may require additional equity or debt financing.

Off-Balance Sheet Arrangements

The Company is not a party to any contract or other obligation not included on its balance sheet that has, or is reasonably likely to have, a current or future effect on its financial condition.

Item 7A. Quantitative and Qualitative Disclosure About Market Risk

The Company does not have operations subject to material risk of foreign currency fluctuations, nor does it use derivative financial instruments in its operations or investment portfolio. The Company has a $20.0 million line of credit with its primary commercial banks. Under the terms of the revolving credit agreement, the Company may elect to pay interest at either a fluctuating base rate established by the bank from time to time or at a rate based on the rate established in the London interbank market. The Company does not believe that it has any material exposure to market risk associated with interest rates.

Item 8. Financial Statements and Supplementary Data

In this report the consolidated financial statements of the Company and the accompanying notes to consolidated financial statements appear on pages F-1 through F-18 and are incorporated herein by reference. See Index to Consolidated Financial Statements on Page 21.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

Item 9A. Controls and Procedures

The Company evaluated the effectiveness of the design and operation of its disclosure controls and procedures as of the end of the period covered by this report. The evaluation was carried out under the supervision of and with the participation of the Company’s management, including the Company’s Chief Executive Officer and Chief Financial Officer. Based on the evaluation, the Chief Executive Officer and Chief

19

Table of Contents

Index to Financial Statements

Financial Officer concluded that the Company’s disclosure controls and procedures are effective in timely alerting them to material information relating to the Company, including its consolidated subsidiaries, required to be included in reports the Company files with or submits to the SEC under the Securities Exchange Act of 1934. There have been no changes in the Company’s internal control over financial reporting that occurred during the fourth quarter of fiscal year 2003 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

PART III

Item 10. Directors and Executive Officers of the Registrant

The information regarding executive officers called for by this item may be found following Item 4 of this report on Form 10-K under the caption “Executive Officers of the Registrant” and is incorporated herein by reference.

The information regarding directors and compliance with Section 16(a) of the Securities Exchange Act of 1934 called for by this item may be found in the Company’s definitive Proxy Statement prepared in connection with the 2004 Annual Meeting of Shareholders and is incorporated herein by reference.

The Company has adopted a Code of Ethics for the Chief Executive Officer and Senior Financial Officers (the “Code of Ethics”) and a Code of Business Conduct and Ethics, which applies to all employees and directors, including the Chief Executive Officers and Senior Financial Officers. The Company will make these codes publicly available by posting the codes on its website at www.gulfisland.com. Any substantive amendments to the Code of Ethics or any waivers granted under the Code of Ethics will be disclosed within five days of such event on the Company’s website.

Item 11. Executive Compensation

Information called for by this item may be found in the Company’s definitive Proxy Statement prepared in connection with the 2004 Annual Meeting of Shareholders and is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management

Information regarding security ownership of certain beneficial owners and management called for by this item may be found in the Company’s definitive Proxy Statement prepared in connection with the 2004 Annual Meeting of Shareholders and is incorporated herein by reference.

20

Table of Contents

Index to Financial Statements

Equity Compensation Plan Information

The following table provides information about the shares of Common Stock that may be issued upon the exercise of options, warrants and rights under all of our existing equity compensation plans as of December 31, 2003.

Item 13. Certain Relationships and Related Transactions

Information called for by this item, if any, may be found in the Company’s definitive Proxy Statement prepared in connection with the 2004 Annual Meeting of Shareholders and is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services

Information called for by this item may be found in the Company’s definitive Proxy Statement prepared in connection with the 2004 Annual Meeting of Shareholders and is incorporated herein by reference.

21

Table of Contents

Index to Financial Statements

PART IV

Item 15. Exhibits, Financial Statement Schedules, and Reports on Form 8-K

(a) The following financial statements, schedules and exhibits are filed as part of this Report:

(i) Financial Statements

(ii) Schedules

Other schedules have not been included because they are not required, not applicable, immaterial or the information required has been included elsewhere herein.

(iii) Exhibits

See Exhibit Index on page E-1. The Company will furnish to any eligible shareholder, upon written request, a copy of any exhibit listed upon payment of a reasonable fee equal to the Company’s expenses in furnishing such exhibit. Such requests should be addressed to Investor Relations, Gulf Island Fabrication, Inc., P.O. Box 310, Houma, LA 70361-0310.

On October 24, 2003, the company filed a report on Form 8-K to furnish (under Item 7 and Item 12) its press release announcing its third quarter earnings.

22

Table of Contents

Index to Financial Statements

REPORT OF INDEPENDENT AUDITORS

The Board of Directors and Shareholders

Gulf Island Fabrication, Inc.

We have audited the accompanying consolidated balance sheets of Gulf Island Fabrication, Inc. as of December 31, 2003 and 2002, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2003. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with auditing standards generally accepted in the United States. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Gulf Island Fabrication, Inc. at December 31, 2003 and 2002, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2003 in conformity with accounting principles generally accepted in the United States.

As discussed in Note 3 to the consolidated financial statements, effective January 1, 2002, the Company adopted Statement of Financial Accounting Standards No. 142, “Goodwill and Other Intangible Assets”.

New Orleans, Louisiana

February 19, 2004

ERNST & YOUNG LLP

F-1

Table of Contents

Index to Financial Statements

GULF ISLAND FABRICATION, INC.

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these statements.

F-2

Table of Contents

Index to Financial Statements

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF INCOME

(in thousands, except per share data)

The accompanying notes are an integral part of these statements.

F-3

Table of Contents

Index to Financial Statements

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS’ EQUITY

(in thousands, except share data)